Connect GL.iNet using Wireguard client

Overview

In this article, you’ll learn how to setup Wireguard client on Gl.iNet and connect it to the Acreto ecosystem.

How to

Prerequisites

To connect GL.iNet router with Acreto Ecosystem, you will need:

  1. Existing Acreto Ecosystem, if you don’t have one learn how to create it.

  2. Access to Acreto Wedge.

  3. GL.inet router with Wireguard client installed.

Download the OpenVPN profile from Acreto

  1. Log in to the Acreto Portal.

  2. Choose your Ecosystem.

  3. Create a new Wireguard gateway profile using tutorial and download the new Wireguard configurations. GL.iNet - wireguard GL.iNet - wireguard

Setup OpenVPN client on GL.iNet

  1. Login to the GL.iNet routers Web Admin Panel.

  2. From the left sidebar, goto VPN » Wireguard Client and click + Set up WireGuard Manually.. GL.iNet - wireguard GL.iNet - wireguard

  3. Goto tab Configuration and paste the Wireguard configuration from the downloaded file in previous steps. GL.iNet - wireguard GL.iNet - wireguard

  4. Modify the Alloweed IPs = 0.0.0.0/0 and click Next. GL.iNet - wireguard GL.iNet - wireguard

  5. Enter a description for your Wireguard connection and then click Add. GL.iNet - wireguard GL.iNet - wireguard

  6. Click Connect to start the Wireguard connection. GL.iNet - wireguard GL.iNet - wireguard

  7. Once connected, the Disconnect button is shown on the screen along with the recieved IP address and Data sent and recieved information. GL.iNet - wireguard GL.iNet - wireguard

  8. Also the Gl.iNet Dashboard, will show the Wireguard VPN connected. GL.iNet - wireguard GL.iNet - wireguard